Home
All Products
Antennas
Cables & Connectors
APs & Cards
Amplifiers
Netstumbler Kits
LAN Parts
M'nM Kits
Weatherproof AP
Power Over Ethernet
Masts & Accessories
ADSL Sharing
Recommended Reading
Ordering & Shipping
Successes & Testimonials
FAQs
Contact Us
Become a Reseller
Installers
Bicton FreeNet

   The Weatherproof AP Enclosure 

bullet

Introduction

bullet

Block Diagrams

bullet

Specifications

bullet

Options

bullet

Mounting

bullet

Prices & Ordering

 

 Don't forget to see the Rootenna
 Antenna + Enclosure in one. 

It's Here!

Weatherproof Enclosure for Linksys WRT54G.

Introduction

The AP Enclosure is an externally-mountable, weatherproof box, that can house your AP. If required, it includes an integrated Regulated Power Over Ethernet (RPOE) module so that your AP receives a steady supply voltage, regardless of ethernet cable length, or current fluctuations.

You can buy an AP Enclosure, and the optional Pole Mount Kit   here .

 

Click image to enlarge

Block Diagrams

 

Click on images to enlarge

Minitar Version

  The Minitar version does not need a regulator. All the regulation is done within the AP.

Specifications

All specifications below are for a 'standard' unit. Custom models with different configurations available on request.

Enclosure
bullet The material is ABS plastic, and the enclosure is sealed to an IP65 rating, which means: "Totally protected against dust, and Protected against low pressure jets if water from all directions - limited ingress permitted." In reality, it means that rain and dust will not get inside.
 Dimensions

 L x W x H (mm)

To Suit..

Minitar
Outside  171 x 121 x 55
Inside  165 x 115 x 49
RF Cable
bulletExternal Connector: N (male)
bulletInternal Connector: RPSMA (female)
bulletLength: 1m
bulletLoss: 0.66 dB/m @ 2.4 GHz
POE Cable
bulletCAT5e. Specify length at time of purchase. Lengths up to 20m available
bulletEthernet: Terminated in RJ45 plugs at each end
bulletPower: Terminated with 2.1mm DC plug/socket at each end
AP
bulletOptional Extra.
bulletYou can request a Minitar MNWAPB he Senao 3054CB3+ AP be pre-installed in your enclosure.
V-Clamps
bulletOptional Extra
bulletSuits a wide range of pipe sizes. Cadmium plated for weather resistance.

 

Options

The following customizations are possible. Just email your requirements to get a custom price.

Feature Default Options
Antenna cable connectors N-male  N-female, or some other type.
RPSMA  RPTNC, or N-female (so you can provide you own pigtail).
Cable Entry Cable Glands  Removable connectors. The standard model has non-removable cables; the cable glands simply clamp down on the cable and make a weatherproof seal.
Cable lengths:

CAT5e

Antenna

 

15m

1m

 

 Lengths up to 20m available

 Any practical length available
 

Line Plugs/Jacks 2.1mm  Any standard type of line jack/plug
V-Clamps 2  Specify number required
AP none  Minitar MNWAPB or the Senao 3054CB3+ can be supplied, and fitted.

 

Mounting

The enclosure comes with 4 holes, that can be used to attach to any flat surface.

An optional Pole Mount Kit is available, with the following features.

bulletadditional protection from direct heating from the sun
bulletadditional protection from UV rays from the sun, extending the life of the ABS enclosure
bulletincludes two V-clamps for direct mounting to a pole
bulletV-clamp mounting holes exactly match those of the 'Downpipe' waveguide antenna, making combination mounting a simple task.
Click on images to enlarge  

This picture shows the Pole Mount Kit mounted to a standard pole. A single V-Clamp is sufficient.

This picture shows the Pole Mount Kit used in conjunction with a Downpipe antenna. The V-clamp holes on the Pole  Mount Kit exactly match the mounting holes on a Downpipe antenna, simplifying the mounting process.

This picture also shows the Weatherproof AP Enclosure mounted inside the Pole Mount Kit.

The RPOE cable (CAT5e) is not 'external' cable. Any outside sections should be protected with suitable conduit.

Prices and Ordering

Typical pricing for a complete unit, with 15m of CAT5 cable, is shown below.

Item Version
Minitar Senao
3054CB3+
Weatherproof Enclosure, glands, antenna cable, 15m CAT5 $118 $118
AP (incl. installation, and 24 hr test operational test) $110 $270
Pole Mount kit (Heavy Duty). (Light duty available for $22 saving) $44 $44
V-Clamps (2 ea) $10 $10

Total

$282 $442

Place your order or ask questions: Click Here

Site Meter    Copyleft: Rob Clark 2003,2004   Comments?: Webmaster     

VoIP Number:
(Timezone: GMT+8hrs: Perth, Australia)

sip:1007@gw4.austechpartnerships.com
sip:1007@218.214.160.121

   Recommended Site: